Neighbor Maximum-Prefix - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Border Gateway Protocol
NEIGHBOR MAXIMUM
neighbor {<ip-address>|<peer-group-name>} maximum-prefix <1-
4294967295> [<1-100>] [warning-only]
D
ESCRIPTION
Enter this command in the Router Configuration mode. This command configures
the maximum number of prefixes that can be received from a neighbor.
P
ARAMETERS
Parameter
ip-address
peer-group-name
1-4294967295
1-100
warning-only
D
EFAULT
This command is disabled by default. There is no limit on the number of prefixes.
E
XAMPLE
ALU(config-router bgp AS30)#neighbor 1.1.1.1 maximum-prefix
20000 50
426
Beta
-
PREFIX
Neighbor's IP address.
Name of a BGP peer group.
Maximum number of prefixes allowed from this neighbor.
The threshold value in percentage at which warning
messages are generated. The default is 75%.
Allows the router to generate warning message when the
maximum limit is exceeded, instead of terminating the
peering.
Alcatel-Lucent
Description
OmniAccess 700 CLI Command Reference Guide
Beta