Radius-Server Auth-Port; Radius-Server Deadtime - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
System Configuration and Monitoring
-
RADIUS SERVER AUTH
radius-server auth-port <1-6000>
D
ESCRIPTION
This command is used to specify a global authentication port that will be applied to
all the Radius Server groups (provided there is no server specific port configured).
P
ARAMETERS
auth-port <1-6000>
D V
EFAULT ALUE
The default authentication port is 1812.
E
XAMPLE
ALU(config)# radius-server auth-port 1800
-
RADIUS SERVER DEADTIME
radius-server deadtime <1-1440>
D
ESCRIPTION
This command is used to specify a global deadtime value that will be applied to all
the RADIUS Server groups (provided there is no server specific deadtime
configured).
P
ARAMETERS
deadtime <1-1440>
D V
EFAULT ALUE
The default deadtime value is 5 minutes.
E
XAMPLE
ALU(config)# radius-server deadtime 10
82
Beta
-
PORT
Parameter
Parameter
Alcatel-Lucent
Description
Destination port on which RADIUS
server is listening.
Description
The time (in minutes) that should elapse,
before you try again to connect to a non-
responding server.
OmniAccess 700 CLI Command Reference Guide
Beta