Left running head:
Chapter name (automatic)
Virtual Routing and Forwarding
TRACEROUTE
traceroute [vrf <vrf-name>] {<ip-address>|<hostname>}
D
ESCRIPTION
Traceroute command is used for figuring out the path taken by the IP packet.
P
ARAMETERS
vrf-name
ip-address
hostname
P
S
LATFORMS
UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# traceroute vrf ALU-vrf 1.2.3.1
R
H
ELEASE
ISTORY
Release 2.3: parameter vrf <vrf-name> was added.
568
Beta
Parameter
Alcatel-Lucent
Description
If the VRF name is specified, the packets
will be routed using the routing table of
the specified VRF on a interface
associated with the VRF.
IP address of the host.
Name of the host.
OmniAccess 700 CLI Command Reference Guide
Beta