Bgp Default Local-Preference - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

D V
EFAULT ALUE
Disabled by default.
E
XAMPLE
ALU(config-router bgp AS30)# bgp dampening 2 200 200 20
BGP DEFAULT LOCAL
bgp default local-preference <0-4294967295>
D
ESCRIPTION
Enter this command in the Router Configuration mode. This command configures
the default local preference value.
In the best path selection process, this attribute is used and route with highest
local-preference that selected. Route map has an option of 'set local-preference'.
You can use this to selectively give preference to some routes over the other.
P
ARAMETERS
Parameter
0-4294967295
D V
EFAULT ALUE
By default, local preference value is 100.
E
XAMPLE
ALU(config-router bgp AS30)#bgp default local-preference 5000
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
-
PREFERENCE
Specify the local preference value. Higher the value the
more preference it has.
Alcatel-Lucent

bgp default local-preference

Description
Beta
411