Dot1X Timeout Quiet-Period; Dot1X Timeout Reauth-Period - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
802.1X Port-Based Authentication
1
DOT X TIMEOUT QUIET
dot1x timeout quiet-period <1-3600>
D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command
sets the number of seconds that the OA-700 remains in the quiet state following a
failed authentication exchange with the client.
P
ARAMETERS
1-3600
D V
EFAULT ALUE
The default is 60 seconds.
E
XAMPLE
ALU(config-if switchport5/0)# dot1x timeout quiet-period 50
1
DOT X TIMEOUT REAUTH
dot1x timeout reauth-period <1-65535>
D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command
sets the number of seconds between reauthentication attempts. This is valid only
if periodic reauthentication is enabled.
P
ARAMETERS
1-65535
D V
EFAULT ALUE
The default is 3600 seconds.
E
XAMPLE
ALU(config-if switchport5/0)# dot1x timeout reauth-period 4500
194
Beta
-
PERIOD
Parameter
-
PERIOD
Parameter
Alcatel-Lucent
Description
Indicates the number of seconds that the
OA-700 remains in the quiet state.
Description
Indicates the number of seconds
between reauthentication attempts.
OmniAccess 700 CLI Command Reference Guide
Beta