Left running head:
Chapter name (automatic)
L3 Interface Commands
CLEAR COUNTERS
clear
D
ESCRIPTION
This command is used in the Interface Configuration mode. This command clears
the counters on a specific GigE interface.
P
ARAMETERS
None
E
XAMPLE
ALU(config-if GigabitEthernet7/0)#clear
Clear counters on this interface [confirm]y
ALU(config)#
CLEAR COUNTERS
clear counters GigabitEthernet <slot/port>
(:subinterface_number)
D
ESCRIPTION
This command is used in the Interface Configuration mode or Configuration
mode. This command clears the counters on a specific GigE interface.
P
ARAMETERS
slot/port
(:subinterface_number)
E
XAMPLE
ALU(config)# clear counters GigabitEthernet 7/0
Clear counters on this interface [confirm]y
ALU(config)#
152
Beta
Parameter
Alcatel-Lucent
Description
This command clears the counters on
the GE interface.
OmniAccess 700 CLI Command Reference Guide
Beta