0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
1 lost carrier, 2 no carrier, 0 pause output
0 output buffer copied, 0 interrupts, 0 failures
ALU#
SPEED
speed {10|100|1000|auto}
D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command
configures the interface speed.
P
ARAMETERS
None.
D
V
EFAULT
ALUE
The default speed is "auto".
E
XAMPLE
ALU(config-if GigabitEthernet7/0)# speed 100
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Alcatel-Lucent
speed
159
Beta