Load Config-File; Logging Buffered - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
LOAD CONFIG FILE
load config-file <file-name>
D
ESCRIPTION
This command is used to load a configuration file to the running configuration.
This effectively leads to the execution of all the commands in the given file.
This file should be present in the alu-config directory. (Use the copy commands to
copy the file to the alu-config directory.)
P
ARAMETERS
filename
E
XAMPLE
ALU# load config-file config1
Loading config1 to running-config...
/-------- Percent Complete --------
|*********************************

LOGGING BUFFERED

logging buffered [priority <0-7>|size <4-16384>]
D
ESCRIPTION
This command is used to store the log information in the memory buffer. If a
priority value is given, messages of that priority and higher (numerically lower) will
be buffered.
P
ARAMETERS
0-7
size
D V
EFAULT ALUE
By default, logging is sent to the buffer.
E
XAMPLE
ALU(config)# logging buffered priority 5
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Parameter
Alcatel-Lucent
Description
Name of the file in the alu-config
directory from where the configuration is
to be loaded.
Description
Priority level.
Logging buffer size. This can vary from 4
-16384 kilobytes.
Beta

load config-file

61