Network; Router Bgp - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

NETWORK

network {<network-number> mask <subnetmask>|<ip-address/prefix-
length>}[{backdoor|route-map <name>|weight <0-65535>}]
D
ESCRIPTION
Enter this command in the Address Family or Router Configuration mode. This
command specifies the networks to be advertised through BGP.
P
ARAMETERS
Parameter
network-number
mask
<subnetmask>
backdoor
name
0-65535
D V
EFAULT ALUE
No networks are specified.
E
XAMPLE
ALU(config-router bgp AS30)#network 35.0.0.0/8

ROUTER BGP

router bgp <
D
ESCRIPTION
This command is used in the Configuration mode. This command enables BGP
routing for the local AS and changes to RCM.
P
ARAMETERS
Parameter
as-number
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Network number.
Network mask address.
Specify a BGP backdoor route. This specifies a backdoor
route to a BGP border router that will provide better
information about the network.
Name of the route-map.
An absolute weight to a BGP network.
>
as-number
Number of an autonomous system that identifies the router
to other BGP routers and tags the routing information
passed along. The range for the as-number is 1 - 65535.
Alcatel-Lucent
Description
Description
Beta
network
437