Show Ip Ospf Retransmission-List - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Open Shortest Path First
SHOW IP OSPF RETRANSMISSION
show ip ospf [<1-65535>] retransmission-list [neighbor-router-
id] [{GigabitEthernet|Serial} <slot/port>|Loopback <0-14487>}]
D
ESCRIPTION
This command displays a list of all LSAs waiting to be re-sent. This command is
used in the Router Configuration mode.
P
ARAMETERS
1-65535
neighbor-router-id
{GigabitEthernet|Serial}
<slot/port> Loopback <0-14487>
E
XAMPLE
ALU# show ip ospf retransmission-list
Neighbor 1.1.1.1, interface GigabitEthernet 7/0 address 1.1.1.2
Link state retransmission due in 4 sec, Queue length 0
Type LS ID
Neighbor 6.6.6.6, interface GigabitEthernet 7/1 address 2.2.2.2
Link state retransmission due in 0 sec, Queue length 1
Type LS ID
3 1.1.1.0
ALU
#
502
Beta
-
LIST
Parameter
OSPF Router with ID (1.1.1.2) (Process ID 1)
ADV RTR
ADV RTR
1.1.1.2
Alcatel-Lucent
Description
Process ID. If this argument is included,
only information for the specified routing
process is displayed.
(Optional) Neighbor router ID.
Displays the list of all LSAs waiting to be
resent for this neighbor.
Displays the list of all LSAs waiting to be
resent on a specified interface.
Seq NO Age
Seq NO Age
0x80000001
OmniAccess 700 CLI Command Reference Guide
Beta
Checksum
Checksum
2 0x69AA