Telephony-Default-Dialplan - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
TELEPHONY DEFAULT
telephony-default-dialplan dest-num-pattern <number-pattern>
D
ESCRIPTION
Enter this command in the Telephony Service Mode. This command is used to
configure the dial plan for local numbers (within the LAN) registered with the call
servers.
P
ARAMETERS
dest-num-pattern
D V
EFAULT ALUE
None.
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
1. In the following example, only 3 (extension) digits call will be successful. All
other calls will be dropped.
ALU(telephony-service)# telephony-default-dialplan dest-num-
pattern [0-9]{3}
2. In the following example, only 6 digits call will be successful:
ALU(telephony-service)# telephony-default-dialplan dest-num-
pattern [0-9]{6}
3. In the following example, calls to phones having 3 characters followed by 2
digits will be successful:
ALU(telephony-service)# telephony-default-dialplan dest-num-
pattern ([a-z]{3}[0-9]{2})
OmniAccess 700 CLI Command Reference Guide
Beta
-
DIALPLAN
Parameter
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
Destination number pattern.
Note: Destination number pattern is
based on the PCRE standard.
The number pattern can be a
maximum of 64 characters.

telephony-default-dialplan

767
Beta