Random-Detect - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
RANDOM DETECT
Command (in Class Mode)

random-detect

random-detect ip-dscp
random-detect ip-precedence
random-detect ip-dscp <0-63>
min-thresh <50-750> max-thresh
<150-950>
random-detect ip-precedence <0-
7> min-thresh <50-750> max-
thresh <150-950>
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
This command enables RED.
This command enables ip-dscp
based WRED, with the default
values.
This command enables ip-
precedence based WRED, with the
default values.
Use this command to change the
default ip-dscp based WRED values.
This command populates the WRED
values but does not enable the
features. To enable this, use the
'random-detect ip-dscp' command.
Note:
Use this command to change the
default ip-precedence based WRED
values. This command populates the
WRED values but does not enable
the feature. To enable this, use the
'random-detect ip-precedence'
command.
Note:
Alcatel-Lucent
random-detect
Description
The queue limit of the
traffic class should be
greater than the max
thresh value.
The queue limit of the
traffic class should be
greater than the max
thresh value.
791
Beta