Ip Pim Neighbor-Filter; Ip Pim Rp-Address - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

IP PIM NEIGHBOR
ip pim neighbor-filter {<1-99>|<standard access-list-name>}
D
ESCRIPTION
Enter this command in the Interface Configuration mode. This command is used
to prevent PIM router from forming neighborship with other router. Using access-
list, you can specify permitted neighbors.
P
ARAMETERS
Parameter
1-99
standard access-
list-name
D V
EFAULT ALUE
By default, PIM router forms neighborship with all the routers on an interface.
E
XAMPLE
ALU(config-if Serial0/0:0)# ip pim neighbor-filter acc-list1
-
IP PIM RP ADDRESS
ip pim rp-address <ip-address> [override]
D
ESCRIPTION
Enter this command in the Configuration mode. This command is used to
configure the RP router address for all multicast groups.
Note: All routers in the PIM domain should have same RP address for a multicast group.
P
ARAMETERS
Parameter
ip-address
override
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config)# ip pim rp-address 11.0.0.3
OmniAccess 700 CLI Command Reference Guide
Beta
-
FILTER
Standard access-list number.
Name of a specific access list. Use this to specify
permitted neighbors.
RP router address.
This is used to give preference to static RP over dynamic RP.
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
Description

ip pim neighbor-filter

515
Beta