Address-Family Ipv4 Unicast - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Border Gateway Protocol
-
ADDRESS FAMILY IPV

address-family ipv4 unicast

D
ESCRIPTION
Enter this command in the Router Configuration mode. This command specifies
the type of address family to be created and changes the command mode to
Address Family mode.
P
ARAMETERS
None.
Note: In the OA-700, currently only IPv4 address family and unicast services are supported.
By default all commands are applied to ipv4 unicast address family.
E
XAMPLE
ALU(config-router bgp AS30)# address-family ipv4 unicast
ALU(config-router-af-ucast)#
404
Beta
4
UNICAST
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Beta