Ip Dhcp Option Dns-Server - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
DHCP (Dynamic Host Configuration Protocol) Server
IP DHCP OPTION DNS
ip dhcp option dns-server <ip-address> [vrf <vrf-name>]
D
ESCRIPTION
Enter this command in the Configuration mode. This command is used to
configure the DNS server IP address to be used by the clients.
P
ARAMETERS
ip-address
vrf-name
D V
EFAULT ALUE
None.
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# ip dhcp option dns server 1.2.2.2
R H
ELEASE ISTORY
Release 2.3: Parameter [vrf <vrf-name>] was added.
818
Beta
-
SERVER
Parameter
Alcatel-Lucent
Description
IP address of the DNS Server.
If the VRF name is specified in the
commands, it configures the DHCP
option for the specified VRF.
If the VRF is not specified, the option is
configured for the Default VRF.
OmniAccess 700 CLI Command Reference Guide
Beta