No Ip Dhcp Relay; No Ip Dhcp Relay Interface; Show Ip Dhcp Relay - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

NO IP DHCP RELAY

no ip dhcp relay [<dhcp server ip-address>]
This command is used to disable all/a specific relay configured on an interface.

NO IP DHCP RELAY INTERFACE

no ip dhcp relay interface <interface-name>
This command is used to disable the relay of DHCP requests to the specified
interface.

SHOW IP DHCP RELAY

show ip dhcp relay [<interface-name>]
D
ESCRIPTION
This command shows the DHCP Relay configuration of all/an interface.
P
ARAMETERS
interface-name
E
XAMPLE
ALU(config)# show ip dhcp relay
Interface
GigabitEthernet3/0
GigabitEthernet3/0
OmniAccess 700 CLI Command Reference Guide
Beta
Parameter
Relay destination
192.168.1.1
GigabitEthernet3/1
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
Shows the DHCP Relay configuration on
the specified interface.
no ip dhcp relay
849
Beta