Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual page 354

Note: There is no ordering of rules inside a match-list. All the rules are of same priority. The
rule numbers are used only for reference.
E 3:
X
Consider the following example with the necessary modes of configurations
included:
ALU> en
ALU# configure terminal
ALU(config)# list l1 host 192.168.0.4 prefix 192.168.0.1/24
interface GigabitEthernet7/0
ALU(config)# list l2 host 192.168.0.3 include l1
ALU(config)# match-list m1
ALU(config-match-list-m1)# tcp any list l1 length 23 from
ssh service range 23 35
ALU(config-match-list-m1)# exit
ALU(config)# match-list m2
ALU(config-match-list-m2)# include m1
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Alcatel-Lucent
include
321
Beta