Passive-Interface - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Router Information Protocol
-
PASSIVE INTERFACE
passive-interface {<interface-name>|default}
D
ESCRIPTION
This command is used in the Router Configuration mode. This command disables
the sending of routing updates on specified interfaces and controls the set of
interfaces with which to exchange routing updates.
P
ARAMETERS
Parameter
in
default
D V
EFAULT ALUE
Routing updates are sent on the RIP enabled interface.
E
XAMPLE
ALU(config-router rip)# passive-interface GigabitEthernet 7/0
390
Beta
Description
Suppresses routing updates on the specified interface.
Suppresses routing updates on all interfaces.
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Beta