Table of Contents
Advertisement
To Create a ALG Rule:
[<1-65535>] match [any|all] <match-list name>... service
{<service-name>|alcatel-tftp|dns|ftp|none|rpc|rtsp|sip|tftp}
This command creates a rule for mapping ALG action for a well known service to
a non-standard port or disable a well known service on its well known port.
The range for the rule number is 1-65535.
1-65535
match-list name
The following example shows that if the packet is intended for the server with
address 20.1.1.1 comes to port 100, then the service is recognized as FTP and
the ALG is invoked accordingly. The standard port invocation of ALG is also active
here.
ALU(config)# match-list m1
ALU(config-match-list-m1)# tcp any host 20.1.1.1 to 100
ALU(config-customized-service)# match all m1 service ftp
NO RULE
no rule <1-65535>
Enter this command in the Customized Service mode. This command deletes an
existing ALG rule.
SHOW CUSTOMIZED
show customized-service
D
ESCRIPTION
This command is used in the Configuration mode. This command shows the ALG
rule based service details.
E
XAMPLE
ALU(config)# show customized-service
20 match any m2 service none
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
-
SERVICE
Alcatel-Lucent
Description
Denotes the customized ALG rule
number. This rule number signifies the
priority of a rule.
Name of the match-list.
Beta
no rule
643
Advertisement
Table of Contents
