Dot1X Initialize Interface Switchport; Dot1X Max-Request - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

1
DOT X INITIALIZE INTERFACE SWITCHPORT
dot1x initialize interface switchport <slot/port>
D
ESCRIPTION
This command is entered in the Configuration mode. This command initializes the
authentication for the client connected to a port.
P
ARAMETERS
slot/port
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config)# dot1x initialize interface switchport 5/0
1 -
DOT X MAX REQUEST
dot1x max-request <1-10>
D
ESCRIPTION
This command is entered in the Interface Configuration mode.
This command sets the number of times that the switch sends an EAP-request/
identity frame to the client (assuming no response is received) before restarting
the authentication process.
P
ARAMETERS
1-10
D V
EFAULT ALUE
The default is 2.
E
XAMPLE
ALU(config-if switchport5/0)# dot1x max-request 3
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Parameter
Alcatel-Lucent

dot1x initialize interface switchport

Description
Interface slot and port number.
Description
Indicates the number of times that the
switch sends an EAP-request/identity
frame to the client.
Beta
191