Tunnel Df-Bit; Tunnel Source - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
TUNNEL DF BIT
tunnel df-bit {clear|set|copy-from-inner-ip}
D
ESCRIPTION
This command sets the value of the DF-bit for the Outer-IP header.
P
ARAMETERS
clear
set
copy-from-inner-ip
D V
EFAULT ALUE
The default DF-BIT value is 'clear'.
E
XAMPLE
ALU(config-if Tunnel7)# tunnel df-bit clear

TUNNEL SOURCE

tunnel source {<ip-address>|<interface-name>}
D
ESCRIPTION
This command sets the source IP address of the tunnel.
P
ARAMETERS
ip-address
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config-if Tunnel7)# tunnel source 10.91.0.7
or
ALU(config-if Tunnel7)# tunnel source GigabitEthernet7/0
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Parameter
Alcatel-Lucent
Description
Clears the DF-bit.
Sets the DF-bit value.
Copies from the original IP header.
Description
Source IP address of the tunnel.
Beta

tunnel df-bit

731