Class-Map - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
CLASS MAP
class-map <class-map name> match [any|all]
D
ESCRIPTION
Enter this command in the Configuration mode.
This command is used to configure a class map, and define the relationship
between all the match-lists configured within the class map.
This command enters the class-map sub-configuration mode.
P
ARAMETERS
class-map name
match [any|all]
D V
EFAULT ALUE
Default match-list relationship of a class-map is 'match-any'.
E
XAMPLE
ALU(config)# class-map C1 match-all
ALU(config-qos-C1)#
To Configure a Rule for the Class-map:
[<1-65535>] match [all|any] <match-list name>...
This command is used to configure rules (associate match-lists and set
priority for the rule) for a class map. The range for the rule is 1-65535. This
rule number signifies the priority of a rule.
ALU(config-qos-C1)# match all m1 m3
ALU(config-qos-C1)# match any m2 m4 m5
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
Description
Name of the class-map.
match all specifies that all match criteria
must be met for traffic entering the traffic
class to be classified as part of the traffic
class.
match any specifies that one of the
match criteria must be met for traffic
entering the traffic class to be classified
as part of the traffic class.
Beta

class-map

781