Interfaces - Configuring Serial Interface (V.35/X.21) - Alcatel-Lucent OmniAccess 700 User Manual

C S I
ONFIGURE ERIAL NTERFACE
This page enables you to configure the parameters for a Serial Interface (V.35/
X.21).
Follow the procedure below to configure Serial interface.
Step 1: In the Interfaces page, click Configure icon for the Serial interface
whose parameters are to be configured. This displays the Configuration Serial
page in the Center Panel.
Figure 24: Interfaces - Configuring Serial Interface (V.35/X.21)
Step 2: Associate a VRF to the serial interface. Select the VRF to be associated
from the VRF list. The selected VRF is displayed in the VRF Forwarding field.
Note: By default, all the interfaces are associated with the Default VRF.
Web GUI Users Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
(V.35/ X.21)
Alcatel-Lucent
Configure
45
Beta