ADTRAN AOS Version R10.1.0 Command Reference Manual page 2441

Command Reference Guide Port Channel Interface Command Set
lldp receive
Use the lldp receive command to allow Link Layer Discovery Protocol (LLDP) packets to be received on
this interface. Use the no form of this command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, all interfaces are configured to send and receive LLDP packets.
Command History
Release 9.1 Command was introduced.
Usage Examples
The following example configures the port channel interface to receive LLDP packets:
(config)#interface port-channel 1
(config-p-chan1)#lldp receive
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 2441