ADTRAN AOS Version R10.1.0 Command Reference Manual page 2439

Command Reference Guide Port Channel Interface Command Set
arp arpa
Use the arp arpa command to set ARPA as the standard Address Resolution Protocol (ARP) on this
interface. Use the no form of this command to return to the default setting.
Syntax Description
No subcommands.
Default Values
The default for this command is arpa.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following example enables standard ARP for the port channel interface:
(config)#interface port-channel 1
(config-p-chan1)#arp arpa
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 2439