ADTRAN AOS Version R10.1.0 Command Reference Manual page 2426

Command Reference Guide
ip rip receive version
Use the ip rip receive version command to configure the Routing Information Protocol (RIP) version the
unit accepts in all RIP packets received on the interface. Use the no form of this command to return to the
default setting. Variations of this command include:
ip rip receive version 1
ip rip receive version 2
Syntax Description
1
2
Default Values
By default, all interfaces implement RIP version 1 (the default value for the version command).
Command History
Release 1.1
Functional Notes
Use the ip rip receive version to specify a RIP version that overrides the version (in the Router RIP)
configuration.
AOS only accepts one version (either 1 or 2) on a given interface.
Usage Examples
The following example configures the loopback interface to accept only RIP version 2 packets:
(config)#interface loopback 1
(config-loop 1)#ip rip receive version 2
60000CRG0-35E
Accepts only received RIP version 1 packets on the interface.
Accepts only received RIP version 2 packets on the interface.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Loopback Interface Command Set
2426