Defining A Class - H3C S5120-EI Series Configuration Manual

Figure 3-1 QoS policy configuration procedure
Apply the
policy to an
interface

Defining a Class

To define a class, you need to specify a name for it and then configure match criteria in class view.
Follow these steps to define a class:
To do...
Enter system view
Create a class and enter class
view
Configure match criteria
match-criteria: Match criterion.
Define a class
Define a behavior
Define a policy
Apply the policy
Apply the
Apply the
policy to
policy to a
online
VLAN
users
system-view
traffic classifier tcl-name
[ operator { and | or } ]
if-match match-criteria
Table 3-1
Apply the
policy
globally
Use the command...
shows the available criteria.
3-2
Remarks
—
Required
By default, the relationship
between match criteria is AND.
Required