Table of Contents
Advertisement
Frame relay configuration commands
Basic frame relay configuration commands
display fr inarp-info
Syntax
display fr inarp-info [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. It can only be a
main interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display fr inarp-info command to display statistics about frame relay inverse ARP (InARP) packets,
including requests and replies, for the specified or all frame relay main interfaces.
You may use this command to diagnose whether InARP is operating properly.
Related commands: fr inarp.
Examples
# Display the statistics for frame relay InARP packets.
<Sysname> display fr inarp-info
Frame relay InverseARP
In ARP request
0
Table 11 Output description
Field
Frame relay InverseARP statistics for interface
Serial4/1/8:10(DTE)
statistics for interface Serial4/1/8:10(DTE)
Out ARP reply
Out ARP request
0
1
In ARP reply
1
Description
Display the statistics on frame relay InARP packets for
the interface
63
Advertisement
Table of Contents
