Line Management; Creating A New Line - Leica Captivate Technical Reference Manual

7.4
7.4.1
Description
7.4.2
Access
New Line,
General page
Job Menu - View & edit data
Metadata Description
Out of limit Available for measured coordinate triplets with Auto or Yes
in the Use metadata if When a point is stored with same
point ID as existing point: Check the average. Indicates
an exceeding of the limits.
Next step
Store stores the changes.

Line Management

Overview
A line consists of points and can be created/edited. The individual points are
measured within any app. All points can be used except auxiliary points. Points
can be simultaneously assigned to one or more lines.

Creating a New Line

In Job name, Lines page, press New.
Key Description
Store To store the new line entered and all associated information.
Page To change to another page on this panel.
Fn Indiv ID For an individual name independent of the ID template or to
or change back to the next ID from the configured ID template.
Fn Run
Description of fields
Field Option
Line ID Editable field
Description
The name of the new line. The configured ID
template for lines is used. The ID can be
changed in the following ways:
To start a new sequence of line IDs, type
•
over the line ID.
• For an individual name independent of
the ID template Fn Indiv ID. Fn Run
changes back to the next ID from the
configured ID template.
91