In Total Station Setup - Leica Captivate Technical Reference Manual

In Total Station Setup

Camera & Imaging
Key Description
Measure To measure and store distances and angles.
If configured, an image is taken automatically.
If configured, the image is linked to the point measurement
automatically.
Stop Available if Measure distance: Continuously and Distance
was pressed. Stops the distance measurements. The key
changes back to Measure.
Distance To measure and display distances.
Store To record data.
If Measure distance: Continuously and/or Automatically
measure points is checked, measured points are recorded
and tracking continues. If configured, an image is taken
automatically.
☞
☞
Page To change to another page on this panel.
Fn Display To configure what is displayed in 3D viewer. Refer to "Object
Display,General page".
Fn Tools Refer to "37 Apps - The Toolbox".
In the Setup app, points can be linked with images. Depending on the setting,
the images are linked either automatically or manually.
A Camera page is displayed. Depending on the panel, the available keys differ.
The style of the crosshairs changes with the camera in use.
Click to take an image with the current pixel resolution. The image is then
displayed but not stored on the data storage device yet. In case of multiple
backsight setups, link the image with the next or the previous target.
Depending on the setting, crosshairs are stored on
top of the image.
For the overview camera: If a valid distance meas-
urement is available, then the parallax is corrected
and the crosshairs are overlaid on the image on
their true position.
381