Table of Contents
Advertisement
New Plane,
General page
New Plane,
Points page
Reference Plane & Grid Scan
Key
Description
OK
To continue to the next panel.
Page
To change to another page on this panel.
Description of fields
Field
Option
Plane name
Display only
Number of
Display only
points
Standard
Display only
deviation
Greatest
Display only
distance of
any point
from plane
Next step
Page changes to the Points page.
Yes is shown in the Source point metadata for a point which is used as
•
origin of the plane.
! is shown in the Out of limit metadata if the point is outside maximum
•
distance between a point and the calculated plane as defined on the Gen-
eral page.
Dd is the perpendicular distance of the point from the definition of the
•
plane.
Description
The name of the new reference plane.
Number of points used for plane definition.
Standard deviation of used points for plane
definition. ----- is displayed unless more than
four points are used to define the plane.
Maximum distance between measured point
and defined plane. ----- is displayed unless
more than four points are used to define the
plane.
603
Advertisement
Table of Contents
