Table of Contents
Advertisement
Choose Linked Jobs
Job Menu - Jobs
Field
Option
Ignore the
Check box
extents in
the dxf file
All jobs on the available data storage devices are listed.
Select the jobs you want to link.
Check a box if you want to link the control job to the job.
Key
Description
OK
To return to New Job, Linked jobs page.
Check box behaviour
Description
Checks or unchecks the check box of the highlighted job. The
behaviour depends on the current status of the check box.
Checks or unchecks the check box of the highlighted job. The
behaviour depends on the current status of the check box.
Move the focus on the screen upwards.
Move the focus on the screen downwards.
Tapping the
Checks or unchecks the check box depending on the current
check box
status of the check box. Highlights the line.
Space bar
Starts the job search.
Description of metadata
Metadata
Description
-
The name of the job.
Source
The data storage device where the job is stored.
Date cre-
The date of when the job was created.
ated
Description
When this box is checked then the values for
the extents defined in the dxf file will be
ignored. This may be necessary if these val-
ues are very large meaning that the data will
not be displayed in the 3D viewer after
importing or attaching the file.
When this box is not checked then the val-
ues in the dxf file for the extents are used.
73
Advertisement
Table of Contents
