Leica Captivate Technical Reference Manual page 203

NMEA Message to
Send
Connections - All other connections
Key Description
OK To accept changes and return to the panel from where this
panel was accessed.
Description of fields
Field Option
Stream the Check box
NMEA mes-
sage
Send mes- Immediately
sage
On point
stored
Point type
All points
Occupied
pts only
Auto pts
only
Rate From 0.05s
to 3600.0s
Don't send Check box
message if
quality limit
is exceeded
Description
When this box is checked, the selected NMEA
message is output.
The NMEA message is created as soon as the
information is available. It is sent out in the
time interval as defined in Rate.
The NMEA message is sent on point storage.
☞
If the time interval defined in Rate
is shorter than the epochs of the
panel update, then the internal
computation of positions is
changed to allow the specified rate
of NMEA positions. The panel
update remains unchanged.
Available for Send message:On point
stored.
Defines the type of points for which the
NMEA message is sent.
The NMEA message is sent when any type of
point is stored.
The NMEA message is sent when a manually
measured point is stored.
The NMEA message is sent when auto points
are stored.
Available unless Send message: On point
stored.
Defines the time intervals at which the NMEA
messages are created.
When this box is checked the CQ control can
be defined.
203