Height tracking step-
by-step
6.5.6
Description
Parallel Line step-by-
step
Software Applications
Step
Description
1.
Start Application in Menu » Applications » Tool Kit.
The running application stays open in the background.
2.
Press
on the toolbar.
Pointfinder opens.
3.
Target and measure a reference point at the same horizontal dis-
tance as the point you would like to measure indirectly.
Pointfinder stays open and measured point is displayed.
☞
Do not move the 3D Disto horizontally too much after reference
point has been measured, otherwise the result will be incorrect.
4.
Target the point you would like to measure indirectly as exact as
possible.
The height difference to the reference point is displayed and
updated in real-time in the results window.
5.
Close the Pointfinder to finish the application.
Parallel Line
Parallel line allows laying out lines parallel to a reference line on walls, floors,
or tilted surfaces.
Step
Description
1.
Start application in Menu » Applications » Tool Kit.
The running application stays open in the background.
2.
Press
on the toolbar.
Pointfinder opens.
All points have to be measured on the same surface.
☞
3.
Target and measure start and end point of the reference line.
4.
A pop-up prompts to enter parallel distance to the left or right of
the reference line. Press OK to confirm the entered value.
5.
Pointfinder opens to roughly target layout point.
Press
.
Laser point flashes to indicate the exact position on the parallel.
73