Leica Captivate Technical Reference Manual page 568

Settings,
Graphics page
568
Field Option
View results Check box
after stak-
ing a point
Next step
Page changes to the Graphics page.
This page is only available for staking operations.
Description of fields
Field Option
Help me
navigate
Using line
being
staked
From behind
instrument
Facing
instrument
Facing last
measured
point
Facing point
(design
data)
Facing point
Facing north
Following
arrow
Facing sun
Description
When this box is checked, the stake results
are displayed after staking a point.
Description
The reference direction to be used to stake-
out points. The stakeout elements and the
graphical display shown in the Measure to
line/Stake to line app are based on this
selection.
The direction of the orientation is parallel to
the line.
Available for TS.
The direction of the orientation is from the
instrument to the point to be staked.
Available for TS.
The direction of the orientation is from the
current position relative to the instrument.
The direction of the orientation is from the
current position relative to the last recorded
point.
The direction of the orientation is from the
current position relative to a point from the
design job.
The direction of the orientation is from the
current position relative to a point from the
job.
Available for GS.
The direction of the orientation is from the
current position relative to North.
The direction of the orientation is from the
current moving direction to the point to be
staked. The graphical display shows an arrow
pointing in the direction of the point to be
staked. The current position must have
moved at least 0.5 m for the orientation to
be calculated.
Available for GS.
The position of the sun calculated from the
current position, the time and the date.
Measure to line/Stake to line