Leica Captivate Technical Reference Manual page 934

Description of fields
Field
1st line
2nd line to
16th line
934
Option Description
Display only Fixed to Point ID.
For each line, one of the following options
can be selected.
Angle right For TS:
Displays the horizontal angle difference
between the backsight point and the current
telescope position.
% comple- For GS:
ted Display only field for the percentage of the
time for which the point has been occupied
based on the setting for Stop measurement
based on in the GS Quality Control panel.
Appears in the page during the point occu-
pation if Automatically stop point meas-
urement is checked.
Annotation Editable field for comments to be stored with
1 to Annota- the point.
tion 4
Antenna For GS:
height Editable field for antenna height for static
observations.
Attribute Display only field for attributes for free
(free) 01 to codes.
Attribute
(free) 20
Attribute 01 Editable field for attributes for codes.
to Attribute
20
Azimuth For TS:
Display only field for the azimuth.
Code Editable field for codes.
Code (free) Editable field for free codes.
Code Display only field for the description of free
description codes.
(free)
Code Display only field for the description of
description codes.
Easting For TS:
Display only field for Easting coordinate of
measured point.
GDOP For GS:
Display only field for the current GDOP of the
computed position.
HDOP For GS:
Display only field for the current HDOP of the
computed position.
Measure - Auto Points