Leica Captivate Technical Reference Manual page 591

Points of interest
Measure to line/Stake to line
Field Option
Antenna Editable field
height
Chainage Editable field
Offset Editable field
Height Display only
Height Editable field
Next step
If configured, the Results panel is displayed.
Points of interest are staked out if they appear within the defined Ch-/Ch+/
Stake -/Stake + range and if checked in Settings, Design page. Refer to
"Settings,Design page".
P2'
P1'
P1
000262_002
On the original line:
P1 BOP - Beginning of
project
P2 PC - Beginning of curve
P3 RP - Radius point of the
centre of the curve
P4 MCP - Mid point curve
P5 PT - End of curve section -
Start of straight segment
P6 AP - Angle point
P7 EOP - End of project
General terms:
Description
For GS:
The antenna height as defined in the active
working style is suggested.
The current chainage to be staked.
Current offset being staked.
Measured elevation. The orthometric height
of the current position is displayed.
Design elevation. The orthometric height of
the point to be staked is displayed.
P4'
P5'
P4
P5
P2
P3
On the offseted line:
P1'
P2'
P4'
P6'
P5'
P6a'
P6b'
P6c'
P7'
P6a'
P6'
P6
P7
P7'
Offset BOP - Beginning of
project
Offset PC - Beginning of
curve
Offset MCP - Mid point curve
AP-F - Offset angle point
projected to the next seg-
ment
Offset PT - End of curve sec-
tion - Start of straight seg-
ment
AP-B - Offset angle point
projected to the previous
segment
AVG - Offset in average
direction
BP - Offset bisected point
EOP - End of project
591
P6b'
P6c'