Instrument - Base Settings - Leica Captivate Technical Reference Manual

21
21.1
Description
Access
☞
Satellite Tracking,
Global page
Satellite Tracking,
Advanced page

Instrument - Base Settings

Instrument - Base Settings
Satellite tracking
The settings on this panel define which satellite system, satellites and satellite
signals the instrument uses.
For RTK base:
Select Leica Captivate - Base: Settings\GS base\Satellite tracking.
This panel contains the same settings as the RTK rover Satellite Tracking
panel. Changes made to the settings here in RTK base mode, are reflected in
the RTK rover mode and vice versa.
Key Description
OK To accept changes.
Page To change to another page on this panel.
Description of fields
• Any of the GNSS can only be disabled, if at least one other GNSS in ena-
bled.
At least one GNSS must be enabled.
•
• GPS can never be disabled on the base station.
Field Option
GPS Check box
Glonass Check box
Galileo Check box
BeiDou Check box
Show mes- Check box
sage &
audio warn-
ing, when
loss of lock
occurs
Next step
Page changes to the Advanced page.
Key Description
OK To accept changes.
Description
Defines if the instrument accepts the GPS L1,
L2 and L5 signals when tracking satellites.
For L2 and L5 the multi-frequency licence is
required.
Defines if the instrument accepts GLONASS
L1 and L2 signals when tracking satellites.
Defines if the instrument accepts Galileo E1,
E5a, E5b and AltBOC signals when tracking
satellites.
Defines if the instrument accepts BeiDou B1
and B2 signals when tracking satellites.
Activates an acoustic warning signal and a
message given by the instrument when the
position is lost.
245