Leica Captivate Technical Reference Manual page 825

Stake Face/
Stake Profile
Roads - Tunnel
Field Option
For Check tunnel
Field Option
Check off- Editable field
set
Check Editable field
height diff
Next step
Page changes to the next page.
☞ This page is available for Stake tunnel only.
This page displays the differences between the measured point and the
defined point. The position of the point to stake is reached when all difference
values are close to zero.
Refer to "Stake Face/Stake Profile,page,Check Profile,page" for a description of
keys.
Refer to "51.4 Staking Out" for a description of the elements of the graphical
display.
Description of fields
Field Option
Chainage Display only
CL offset Display only
Nearest ver- Display only
tical tan-
gent point
Next step
Page changes to the
Description
Tunnel_035
Drill vertical angle
α
Description
Applies a horizontal offset perpendicular to
the centreline used for comparing to the
measured point.
Applies a vertical offset to the centreline
used for comparing to the measured point.
Description
The current chainage.
Perpendicular horizontal offset from the cen-
treline.
Distance to the nearest vertical tangent point
of the design.
page.
825