Table of Contents
Advertisement
Compute Points,
General page
Compute Points,
Points page
866
Key
Description
Store
To store the point with class CTRL in the database.
The averaged angles and distances are stored as point
results to the point.
Page
To change to another page on this panel.
Description of fields
Field
Option
Number of
Display only
points
active
Number of
Display only
sets active
Store point
Prefix
ID with
Suffix
Prefix / suf-
Editable field
fix
Use a point
Check box
as reference
Key
Description
Store
To store the calculated points which are set to Yes for the
Accept metadata.
Accept
To set Yes or No for the Accept metadata for the highligh-
ted point.
Description of metadata
Metadata
Description
-
Point ID of the measured points in the order they were
defined and measured.
Easting diff
The difference in Easting between the original and the calcu-
lated points.
Northing
The difference in Northing between the original and the cal-
diff
culated points.
Accept
For Yes:
The selected point is used for calculations in all sets.
For No:
The selected point is not used for calculations in any set.
Description
The number of selected points having been
measured.
The number of sets having been measured.
Adds the setting for Prefix / suffix in front
of the original point IDs.
Adds the setting for Prefix / suffix at the
end of the original point IDs.
The identifier with up to four characters is
added in front of or at the end of the ID of
the calculated points.
When this box is checked, the point selected
is considered fixed: known coordinates and
therefore Easting diff and Northing diff
are made equal to zero.
The values shown on the Points page are
updated accordingly.
Sets of Angles - TS
Advertisement
Table of Contents
