Quickvolume; Accessing Volume Calculations; Volume Calculations - Leica Captivate Technical Reference Manual

61
61.1
Description
61.2
Access
Surface Name
61.3
Calculate Volume
990

QuickVolume

Overview
The app allows volumes to be computed from ALL scans and/or ALL measured
points stored in a job.

Accessing Volume Calculations

Select Leica Captivate - Home: QuickVolume.
Key Description
OK To start the triangulation. All points and scans within the
selected job are used in the triangulation.
Description of fields
Field Option
Surface Selectable list
name
Include all Check box
scans
Include all Check box
measured
points

Volume Calculations

Key Description
OK To accept all settings and continue with the next panel.
Lowest ht To set the minimum elevation point of the current surface as
elevation value. Available for Volume calculation
method: Surface to entered height.
Description of fields
Field Option
Volume cal-
culation
method
Stockpile
Surface to
entered
height
Surface to
point
Description
Name of the surface to be triangulated.
When this box is checked, all scans from the
job are included in the volume calculation.
When this box is checked, all measured
points from the job are included in the vol-
ume calculation.
Description
To calculate the volume of the triangulated
surface.
Volume between the triangulated surface
and the DTM surface defined by the boun-
dary points of the surface.
Volume between the triangulated surface
and the entered height.
Volume between the triangulated surface
and the height of a selected point.
QuickVolume