Table of Contents
Advertisement
56.3
Requirements
Access
Measure
Measure - Auto Points
Field
Option
WGS84 lon-
gitude
Measuring Auto Points
Automatically measure points in Measure Settings, Automatically
•
measure points page.
•
For GS: The rover menu must be used.
Select Leica Captivate - Home: Measure.
Go to the
page.
Before logging of auto points has started, the page appears as shown:
Key
Description
Start
To start logging of auto points.
•
To start logging of offset points, if configured.
•
For Logging starts when: Press 'Start' in Measure
•
app:
To start the chain to which the auto points are assigned.
The first auto point is stored.
For Logging starts when: Accessing the Measure
•
app:
Logging of auto points starts immediately when the
Measure app is accessed. Start need not be pressed.
For TS:
•
•
•
•
Stop
To end recording of auto points.
•
•
To end recording offset points, if configured.
For Measure new point after certain: Key press:
•
To end the chain to which the auto points are assigned.
Measure
Available for GS.
To store a point at any time.
Store
Available for TS.
To store a point at any time.
Description
For GS:
Display only field for the current GNSS posi-
tion.
Measure distance: Continuously becomes active.
For Measure: Prism instrument locks onto prism.
For Measure distance:Greater than 4km, Meas-
ure: Prism is set and instrument locks onto the
prism.
937
Advertisement
Table of Contents
