Define Object To Compare - Leica Captivate Technical Reference Manual

60.5
Define Object to
Compare
Inspect Surfaces
Field Option
Centerline Display only
Next step
OK to access Define Object to Compare.

Define Object to Compare

Define the surface to which the reference surface is compared to.
Key Description
OK To select the highlighted option and to continue with the
subsequent panel.
Fn Settings To configure the app. Refer to "60.3 Configuring Inspect sur-
faces".
Description of options
Option Description
Choose Select a scan in the same way as for the definition of the
existing reference plane. Refer to "60.4.1 From Existing Scans".
scan(s)
Select Select points in the same way as for the definition of the
points from reference plane. Refer to "60.4.2 From Existing Points".
job
Measure Accesses the Measure Mode where measured points are
new points compared to the defined surface.
Next step
OK to access Define Colour Scale.
The panel is the same as in the configuration of the app. Refer to "Set-
tings,Colour scale page".
OK to confirm the surfaces to compare and to access Compare Mode.
Description
The name of the centreline.
987