Table of Contents
Advertisement
Job Menu - Jobs
Description of fields
Field
Option
Use points
Check box
& lines data
Name
Selectable list
Description
Display only
Date cre-
Display only
ated
Last used
Display only
Use a DTM
Check box
DTM
Selectable list
Layer
Display only
or selectable
list
Description
When this box is checked, a separate design
job can be selected. Target points can be
selected from the design job. Individual lines
and/or points of a separate design job can
be staked out.
The selected design job is visible in 3D
viewer.
Control points or lines are stored in the
design job. The design job holds all control
point information needed in the field, for
example, control points, points with known
coordinates used for a TS setup. Lines of the
design job can be used for Stake to line or
Measure to line.
A CAD file attached to a design job can be
used to view and import the CAD lines for
working with.
The detailed description of the job.
The date of when the job was created.
The date of when the job was last accessed.
When this box is checked, a DTM job can be
selected. A DTM job holds DTM (Digital Ter-
rain Model) or TIN (Triangular Irregular Net-
work) data. The files are stored in the \DBX
folder or a subfolder of \DBX.
Holds DTM (Digital Terrain Model) data or
TIN (Triangular Irregular Network) data. The
DTM job to be used must be stored in the
\DBX directory on the active data storage
device.
The DTM job is a read-only source of infor-
mation and cannot be selected as a job.
☞
The selected DTM job is visible in
the 3D viewer.
A DTM job can consist of multiple DTM layers
or surfaces. These DTM layers can cover dif-
ferent locations, be on top of each other or
intersect each other.
If there is only one layer in the DTM job, the
layer name is displayed as an output. If there
are multiple layers, the layer to display in 3D
viewer can be selected.
63
Advertisement
Table of Contents
