Reference Line; Overview; Defining The Base Line - Leica TS03 User Manual

7.5
7.5.1
Description
Access
Next step
7.5.2
Description
Define the base line
84
Field Option
Display only
ΔE
Display only
ΔN

Reference Line

Overview

Reference Line is an app that facilitates the easy stake out or checking of lines,
for example, for buildings, sections of road, or simple excavations. It allows the
user to define a reference line and then complete the following tasks with
respect to that line:
Line & offset
•
• Stake out points
Grid stake out
•
Line segmentation stake out
•
1. Select Apps from the Main Menu.
2. Select Ref.Line from the Programs Menu.
3. Complete app pre-settings. Refer to "6 Apps - Getting Started".
Define the base line for the reference line.

Defining the Base Line

A reference line can be defined by referencing a known base line. The reference
line can be offset either longitudinally, in parallel or vertically to the base line,
or be rotated around the first base point as required. Furthermore the refer-
ence height can be selected as the first point, second point or interpolated
along the reference line.
The base line is fixed by two base points. All points can be either measured,
manually entered, or selected from the memory.
d1
P1
P0
TSOX_088
Define the base line by measuring or selecting the start and end points of the
line.
Description
Easting offset: Positive if stake out point is to
the right of the measured point.
Northing offset: Positive if stake out point is
further away than the measured point
P2
Base line
d2
P0 Instrument station
P1 Start point
P2 End point
d1 Known distance
d2 Difference in height
a
Azimuth
Apps