Leica Captivate Technical Reference Manual page 451

Requirements
Access
Slope Distance
Apps - The Toolbox
Bearing & distance, Using 2 bearings or Back bearing & distance must be
selected for Method.
In Measure Hidden Point highlight Horizontal distance. Press Slope.
Key Description
OK To take over the result.
Description of fields
Field Option
Slope dis- Editable field
tance
Elevation Editable field
angle
Grade (%) Editable field
Horizontal Display only
distance
Difference Display only
in height
Description
Type in a distance from the known point to
the hidden point. When a hidden point
measurement device is attached to the
instrument to measure the distance, the
value is automatically transferred.
Type in the elevation angle from the known
point to the hidden point. When a hidden
point measurement device is attached to the
instrument to measure the elevation angle,
the value is automatically transferred.
The grade from the known point to the hid-
den point is automatically computed from
the slope distance and the elevation angle.
☞
The value for Grade (%) can be
typed in instead of the value for
Elevation angle. Then Elevation
angle is computed automatically.
The horizontal distance from the known
point to the hidden point is automatically
computed from the slope distance and the
elevation angle.
The height difference between the known
point and the hidden point is automatically
computed from the slope distance and the
elevation angle.
Available if Compute height for hidden
points is checked in Hidden Point Set-
tings, Height & offsets page.
451