Table of Contents
Advertisement
Icon
Description
Begin best fit arc
Starts a new curve. A smoothing mathematical function is used
to best fit the subsequent points. The curve starts with the first
measured position. If there is a line with the current code and
string already open, the best fit curve is appended to it.
The best fit curve is a single radius curve. A compound curve is
not supported.
The best fit curve is displayed in 3D viewer when a point was
measured with End best fit arc.
Continue best fit arc
Adds a new point to the sequence of points that define the
shape of the best fit curve.
End best fit arc
Calculates the best fit curve of single radius. Start point is a pre-
vious point of the same line with Begin best fit arc. All points
measured between Begin best fit arc and End best fit arc are
included in the curve.
The best fit curve is displayed in 3D viewer.
Once the best fit curve is ended, it continues the line.
Begin spline
Starts a new spline passing by the subsequent points. The spline
starts with the first measured position. If there is a line with the
current code and string already open, the spline is appended to
it.
The spline is a multiple radius curve. A compound curve is not
supported.
The spline is displayed in 3D viewer when a point was measured
with End spline.
Cont spline
Adds a new point to the sequence of points that define the
shape of the spline.
End spline
Calculates the spline. Start point is a previous point of the same
line with Begin best fit arc. All points measured between Begin
spline and End spline are included in the curve.
The spline is displayed in 3D viewer.
Once the spline is ended, it continues the line.
Close line
Continues the line at the current measured point. Closes the line
by joining it to the first point of the line. The first point of the
line is added to the bottom of the list as closing point.
330
Coding
Advertisement
Table of Contents
