Table of Contents
Advertisement
Create Line,
Input page
500
Key
Description
OK
To change to the second layer of editable fields.
Inverse
To calculate the values for the distance and the offset from
two existing points. Available if Azimuth or Horizontal dis-
tance is highlighted.
Last Inv
To select the values for the distance and the offset from pre-
vious COGO inverse calculations. Available if Azimuth or
Horizontal distance is highlighted.
Meas app
To measure a point manually for the COGO calculation. Avail-
able if Start point or End point is highlighted.
Page
To change to another page on this panel.
Fn Settings
To configure the COGO app.
Fn Modify
To modify the values manually. Available if, Azimuth or Hori-
zontal distance is highlighted.
Description of fields
Field
Option
Create line
using
2 points
Point, bear-
ing & dis-
tance
Start point
Selectable list
End point
Selectable list
Azimuth
Editable field
Horizontal
Editable field
distance,
Horizontal
distance
(ground) or
Horizontal
distance
(ellipsoid)
Description
The method by which the line is defined.
Uses two known points to define the line.
Defines the line using a known point, a dis-
tance and an azimuth of the line.
The start point of the line.
The end point of the line. Available for Cre-
ate line using: 2 points.
The azimuth of the line. Available for Create
line using: Point, bearing & distance.
The horizontal distance from the start point
to the end point of the line. Available for
Create line using: Point, bearing & dis-
tance.
COGO
Advertisement
Table of Contents
