Table of Contents
Advertisement
10.5
Requirements
☞
Access
Import DTM Data
126
Field
Option
Height to
Editable field
apply
Next step
OK leads back to Import DXF Data.
Importing DTM Data
At least one file in DXF format with the file extension *.dxf has to be
•
stored in the \DATA directory of the data storage device.
The DXF file must contain a 3D face layer.
•
Do not remove the data storage device while importing the data.
From the job menu select Import data\DTM.
Key
Description
OK
To import the data.
Fn Settings
To define the linear units of the data to be imported.
Description of fields
Field
Option
From device
Selectable list
From file
Selectable list
To job
Editable field
To device
Selectable list
Next step
Fn Settings accesses Settings.
Description
Available when Apply a height to 2D data
is checked. The height to apply to 2D CAD
points.
Description
Defines from which storage device the data
are imported.
All files with extension *.dxf in the \DATA
directory on the data storage device can be
selected.
The name of the new DTM job. The job is
created once the data is imported.
Defines to which storage device the data are
imported.
Job Menu - Import data
Advertisement
Table of Contents
