Leica Captivate Technical Reference Manual page 898

Settings,Quality con-
trol page
Settings,
Heights page
898
Field Option
Start within Editable field
Next step
Page changes to the Quality control page.
Description of fields
Field Option
Check dif- Check box
ferences
before stor-
ing
Differences Position,
to check Height or
Position &
height
Position Editable field
limit
Position Editable field
limit
Prompt off- Check box
setting
annotation
Next step
Page changes to the Heights page.
Description of fields
Field Option
Allow edit- Check box
ing the
height of
the selected
point
Description
Available when Beep faster
when getting close to point is
checked. The horizontal radial dis-
tance, from the current position
to the point to be staked.
Description
Allows a check to be made on the horizontal
and vertical difference between the staked
point and the point to be staked. If the
defined limit is exceeded, the stake out can
be repeated, skipped or stored.
The type of differences to be checked before
storing a point.
Available when Check differences before
storing is checked. Sets the maximum hori-
zontal coordinate difference accepted in the
position check.
Available when Check differences before
storing is checked. Sets the maximum verti-
cal difference accepted in the height check.
Available for the Seismic stakeout app.
When this box is checked, a specific annota-
tion must be entered when the current
staked point is out of distance tolerance.
This annotation is stored as annotation 1.
Description
When this box is checked, the value for
Design height displayed in Stake Points,
page, can be changed. The design height
is the height of the point to be staked.
When this box is not checked, the value for
Design height cannot be changed.
Stakeout